Are you tired of coming home to a dilapidated-looking house? Do you want to rejuvenate your home’s exterior and give it a new lease on life?
If so, then you need to consider pressure washing your house. Few things can scrub away years of accumulated dirt and grime as a few minutes with a pressure washer.
In this article, we’ll teach you how to go about pressure washing a house.
Pressure Washing vs. Power Washing
The first thing to know is that there is a difference between pressure washing and power washing. You may have heard of both terms, and we want to set you straight regarding them.
When you power wash a house, you use heated water. With pressure washing, you use water that is a normal temperature.
A power wash can achieve a deeper clean, but heated water can negatively affect some materials. That’s why you should always pressure wash your home unless you know that the material you’re targeting will be unaffected by the heat (for instance, the concrete that makes up the driveway).
Use Detergent
When starting a pressure wash on your house, you should always use detergent. This simple step doesn’t take that much time to incorporate in your process and will make a world of difference in increasing the wash’s effectiveness at getting dirt and grime out of even the most intricate nooks and crannies.
Without detergent, you’ll have to apply more pressure to remove dirt, which can damage the materials that you are washing.
Buy a Brush Attachment
Another way to make it easier to get dirt out is to use a brush attachment at the end of the pressure washer wand. This attachment will agitate the dirt and mold growth stuck in the materials you are washing, allowing them to easily be rinsed away by the water.
Use Eye Protection
When pressure washing, you always want to use eye protection. The water is coming out of the pressure washer wand at a mile a minute. If it is accidentally pointed in the direction of your face, then it could cause some serious damage to unprotected eyes.
Cover Up Anything That Shouldn’t Get Wet
Last but not least, remember to cover up anything that shouldn’t get wet. The force from a pressure washer makes water go everywhere, so make sure to take the time to tape up vents and openings that you don’t want water going down.
If all of this sounds like a lot of work, consider hiring a service like Queensland Quality Cleaning to take care of your pressure washing needs for you.
Pressure Washing a House
Now that you know what pressure washing a house entails, all that remains is for you to decide whether or not you’re going to DIY it or if you’re going to call in a professional contractor. If the former, be sure to get together all of the necessary equipment before you start
to ensure a safe, quick wash!
For more home improvement advice, be sure to check out the rest of the articles on the website!