Many of us can’t imagine life without our daily showers. They are those wondrous moments of relaxation and restoration. To not have that first thing in the morning or as a part of your evening wind-down routine would just be unbearable. Yet, you would be out of luck in your quest for that finishing touch on your routines if the shower breaks.
Many problems with showers and baths may not really be all that complicated. If something has gone wrong, the solution for your shower may be simple enough that you can take care of it all on your own. With just a quick fix, you can be having the shower time that you desire in no time.
While a crack in the seams won’t really prevent you from using the shower, it is still a problem that needs to be fixed. Not only does it not look so good, but it can lead to some much more serious concerns if not resolved. By just quickly fixing up the caulking, you will also be preventing leaks and costly water damage.
To take care of this, you simply need to follow the process of re-caulking your shower. Begin by removing the old caulk that’s just not working for you anymore. This step is necessary to give your shower a fresh start, as old and new caulk don’t mix well with each other. Next, you can go ahead and apply the new with a caulk gun. Use your finger to remove excess and smooth it out. Give it some time to dry and your shower, newly-caulked, should be all good to go.
Poor Water Pressure
Another issue that you may run into when trying to take your shower is low water pressure. Most of us prefer a certain level of water pressure during our showers and if the lower amount is a new situation for you, you may realize that something really isn’t right. There are many possible causes for low water pressure, including mineral buildup, obstacles in the pipes, and a showerhead in need of replacement. Some of these causes may take an expert’s skill and time while others may really just be a quick fix. To determine which though, you may need an experienced plumber to make a determination of the situation.
Still, if it is something simple, there’s no reason why you couldn’t take it on yourself in an afternoon. One place to start would be by checking your valves and calling the water company to see if the problem might be unrelated to the plumbing. If the water pressure issue really does lie with your home’s plumbing, you will need to get a proper diagnosis to ensure you seek the right solution. It may just be as simple as replacing the showerhead, a task that anyone can complete quickly.
There are multiple reasons why a showerhead might just not be working for your shower anymore. Some of the main issues that come up are leaks and clogs. Either way is certainly a quick fix.
Showerhead clogs can be resolved by a fairly simple process. All it takes is vinegar to effectively clean out the showerhead. Leave a bag with vinegar on there overnight and it will be good as new when the time for your morning shower comes.
Other issues may not have an alternative solution to complete replacement though. Fortunately, the process of installing a new showerhead is not that difficult or time-consuming. It’s as simple as removing the old and screwing in the new one. There is no way for your showerhead to be posing any more problems for you if you’ve got a brand new one.
Drain Not Functioning
A clogged-up drain is another common shower problem. You may be trying to enjoy the warm water rinsing the suds out of your hair, but it can really pull you out a bit when you notice the water covering your feet as the tub slowly fills up. The reason for the drain not doing its job is usually pretty obvious: hair, soap, or other substances causing a clog. More of an annoyance than anything, these clogs in the shower drain can be fixed quickly and without much trouble.
What you don’t want to do is turn to a complete reliance on commercial drain cleaners. Often, these may help resolve the clog just fine but can end up doing more damage in other ways. A simple solution is baking soda and vinegar down the drain. If that’s not enough, you may need to utilize a plumbing snake or get down into it with your hand to remove the obstacle. Just be sure afterwards to put in a hair catcher or some other method to prevent this issue from arising again at any time in the future.
The Fastest Way to Resolve Plumbing Problems
Of course, sometimes plumbing problems cannot be addressed by a quick fix, especially not if you don’t have the skills to get it done. Your shower may be a truly essential part of your daily routine, so if it breaks, you need the right repair and you may also need it fast. A really fast way to get the fix that you need for your shower is to turn to those that really know what they’re doing.
Having professional plumbers to unclog your drain, resolve the issue of poor water pressure, or fix up anything else wrong with your shower is a smart choice if you’re looking to save on time. This will ensure that your broken shower gets fixed up quickly and effectively. If you need that quick fix now, professional plumbers may be the best way to get it.